![]() ![]() Next, extract the installer as seen in the globalSAN installer screenshot.Next, launch the installer and click on the Continue button at the Welcome screen.At the Software License Agreement screen, read the licensing agreement and then click on the Continue button if you agree to the terms.At the uninstall screen, click on continue. So for starters, fire up your iSCSI storage and share it out. However, we’ve also tested LeftHand, Isilon, OpenFiler, iSCSI Target (from Microsoft) and many others (including dozens of appliances) with the Mac. For the purpose of this article we’re going to use the SNS globalSAN software.For the purposes of this howto, we’re using the free version of software called Starwind from RocketDivision. Software based initiators will use the CPU of your system and a built-in or third party standard Ethernet port, but you can also buy a dedicated card which will offload the processing power to the card, which in some cases will be required for various performance reasons. Alternatively you can also look into the Atto Xtend SAN, which runs about $200 for 1 user with volumes discount slashing the prices to about $90 for 100 users. Studio Network Solutions (SNS) provides a software-based iSCSI initiator called globalSAN that can be downloaded and used free of charge from their site. ![]() As with Xsan, to get started with iSCSI you’ll need an initiator and a target. While you can use pretty much any Ethernet switch, I’d recommend that if you’re going to use iSCSI that you dedicate a switch to it, or use quality switches and build a dedicated VLAN for your iSCSI traffic.Recently, I’ve recently been seeing a lot of traffic about whether or not you can use iSCSI with Mac OS X. This allows you to leverage Ethernet, a low cost network medium to get SAN performance and network based storage. There will be a iSCSI target icon on the desktop and the target can now be used as an external drive on your Mac.ISCSI is a network storage protocol that allows sending and receiving of SCSI commands over a TCP/IP network. Note that all of the data on the target will be erased.Įnter the drive name and select the format. Right-click on the iSCSI target under “External” and select “Erase…”. If the iSCSI target is not readable by the Mac, a dialog box will prompt the user to initialize the iSCSI target.įollow the steps below to initialize the iSCSI target: The iSCSI connection will now appear as “Connected” in the left list box. Select the connection for the iSCSI target in the right list box. Select “Challenge Handshake Auchentication (CHAP)” to enter name and secret fields. Optional: If CHAP authentication is used, select “Authentication”. Select “Always send “Session Type” when connecting”, then select “Done”. ![]() Select an iSCSI Target in the left list box, then select “iSCSI Options”. Select “+” > “Portal/Group”.Įnter the IP address or domain name of the NAS. Run “globalSAN and Xtarget” in "System Preferences".Ĭlick lock icon to unlock and allow for changes. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |